Krishna Metallurgical Laboratories Pvt. Ltd.

NABL ACCREDIATED LABORATORY

krishnametlab@gmail.com

+91-9540953761,9540953762,
0124-2371762, 2210761

Services

Latest News

  • Krishna Metallurgical Laboratories Pvt. Ltd. is one of the leading lab in India.

  • Krishna Metallurgical is opening its branches pan India in 2018

  • We are conducting seminar on NABL ACCREDIATION and laboratories in coming week.

Quality Policy

The Laboratory are committed to exhibit standard of performance in order to achieve total customer satisfaction in the field of Testing Services as per its scope by giving reliable, accurate test results and implementing IS/ISO/IEC 17025:2005 and documented management system besides, thriving for continual improvement.


 Services


1. Chemical Testing By Spectro

  • SPECTRO ANALYSIS
  • COMPLETE SPECTRO ANALYSIS (INCLUDING TRACE ELEMENTS AVAILABLE IN OUR SPECTROMETER) IN STEEL & AI ALLOY, Cu ALLOY, ZINC ALLOY
  • SPECTROANALYSIS (Mg BASE)

2. Wet Analysis - Ferrous

  • ELEMENTS ANALYSIS (C, Mn, Si, S. P, Cr, Ni, Mo, Cu, V, AI, Ti, Co, Ne, Pb, W, Sn)
  • 8 ELEMENTS: (C, Mn, Si, S. P, Cr, N~ Mo)

3. Wet Analysis - Ferro Alloys

  • FERROVANADIUM COMPLETEI V ONLY
  • FERROTUNGSTEN (C, W, AI) I W ONLY
  • FERRO MOLYBDENUM (C. Mo, Si, AI) I Mo ONLY
  • FERRO MANGANESE (C, Mn, P, Si) I Mn ONLY
  • FERRO CHROMIUM (C, Si, Cr, P) I Cr ONLY
  • FERROSILICON (C, Si, AI) lSi ONLY
  • FERRONICKEL (C, Ni, P) INi ONLY

4. Wet Analysis - Non Ferro Alloys

  • ALUMINUM ALLOYS (EACH ELEMENTS)
  • COPPER ALLOYS (BRASS/BRONZE) EACH ELEMENTS
  • ZINC ALLOYS (EACH ELEMENTS)
  • TIN ALLOYS (EACH ELEMENTS)
  • LEAD ALLOYS (EACH ELEMENTS)
  • SOFT SOLDER (Sn, Pb, Bi, Sb) (EACH ELEMENTS)

5. Painted / Plated Components Testing

  • SALT SPRAY TEST-48 HRS.
  • SALT SPRAY TEST¬∑96 HRS
  • SALT SPRAY TEST (ABOVE 96 HRS.)/PER 48 HRS
  • CASS TEST - 24 Hours
  • CASS TEST - 48 Hours
  • HUMIDITYRESISTENCE TEST - 48 HRS
  • HUMIDITYRESISTENCE TEST - 96 HRS.
  • HUMIDITY RESISTENCE TEST (ABOVE 96 HRS.)/PER48 HRS
  • WATER RESISTENCE TEST - 8 HRS.
  • WATER RESISTENCE TEST-96 HRS.
  • WATER RESISTENCE TEST (ABOVE 96 HRS.)/PER48 HRS
  • COATING THICKNESS (DRY FILM THICKNESS)

6. Mechanical Testing

  • SAMPLE PREPARATION TENSILE TEST
  • TENSILE STRENGTH,YIELD,%ELONGATION UPTO 5.0MM
  • TENSILE STRENGTH,YIELD STRENGTH,%EL MORE THAN 5.0 MM
  • TENSILE STRENGTH (TS,YS,%E &RA) UPTO 5.0 MM
  • TENSILE STRENGTH (TS,YS,%E &RA) MORE THAN 5.0MM
  • BREAKING LOAD/LOAD TEST
  • COMPRESSION TEST
  • CUPPING TEST
  • FLATTENING TEST
  • DRIFT EXPENSION TEST/CRUSHING TEST
  • JOMINY 1 IMPACT TEST CHARPY & IZOD
  • BEND TEST (SIZE UPTO 5.0MM)
  • BEND TEST (SIZE FROM 5.1-10.0MM)
  • BEND TEST (SIZE ABOVE 10.0MM)
  • HARDNESS TEST (HRA\HRB\HRC\HR15N\HR30N)
  • WELD PENETRATION PER WELD (SINGLE SIDE)

7. Metallography Analysis

  • GRAIN SIZE (HARDEND & TEMPEREO CONDITION)
  • GRAIN SIZE (NORMALISED CONDITION)
  • INCLUSION RATING TEST
  • MICROSTRUCTURE WITHOUT PHOTOGRAPH
  • MICROSTRUCTURE WITH PHOTOGRAPH
  • DEPTH OF DECARB WITH PHOTOGRAPH
  • CORE HARDNESS HRC
  • SURFACE HARDNESS HV
  • MICROVICKER HARDNESS TEST
  • DENSITY TEST
  • HARDNESS VICKER TEST
  • EFFECTIVECASE DEPTH
  • TOTAL CASE DEPTH
  • NODULARITY IN S.G. IRON
  • GRAY IRON FLAKES C.I.
  • COATING THICKNESS (MICROSCOPIC METHOD)
  • GRAIN FLOW (SAMPLE PREPARATION CHARGES EXTRA)

8. Tor Steel / Tmt Bar Testing

  • MASS PERMETER
  • MEAN RIB AREA
  • REBEND TEST
  • TOR STEEUTMT BAR (AS PER IS 1786)
  • STRUCTURAL STEEL (AS PER IS 2062)

9. Rubber And Plastic

  • Identification Of UnknownPolymer
  • Confirmation of Known Polymer
  • Ash Content
  • Filler Analysis
  • Carbon black Content
  • PolymerContent
  • Hardness (Shore A t Shore D)
  • Tensile Strength and Elongation
  • SAMPLE PREPARATION TENSILE TEST

10. Chemical Test By ICP OES

  • Ferrous Metals (Mn, Si, S, P, Cr, Ni)
  • Non Ferrous Metals (Copper, Aluminium & Zinc)
  • Elemental Analysis, yt, pb, potasium, magnesium, indium, manganese, sodium, ni, cr, cd, amonium, hg, arsenic, cl, fe,

11. ELV / ROHS

  • ELV tROHS TEST (Pb, Cd , Hg, Cr +6)
  • Total Lead
  • Total Cadmium
  • Lead in Surface Coating